Specifications

32 • Getting Started SAM4s ER-900 Series Operator's & Programming Manual v.1.7
0 SBTL 0 3
CASH
Programming a Descriptor for Keyboard PLUs
The default method of programming a descriptor will differ depending upon the specific
ER-900 Series model you are programming.
ER-920 & ER-940 models feature a flat keyboard. The default descriptor program method is
by the Alpha Keyboard Overlay.
ER-925 & ER-945 models feature a raised-key keyboard. The default descriptor program
method is by descriptor codes. Note that if you have purchased the expanded keyboard
version of one of theses models, descriptor entry by overlay method is optional. Consult with
your dealer to determine the correct method of descriptor entry for your model.
Descriptor Programming by Overlay Method for Flat Keyboard Models
Locate the Alpha Keyboard overlay included in your register’s accessory package. Install the
overlay under the protective rubber overlay. The overlay will look like the example below:
1 11 21 31 41 51 61 71 81 91
FEED
JOURNAL
FEED
2 12 22 32 42 52 62 72 82 92
' " < > - + = : ?
! @ # $ % ^ & * ( )
q w e r t y u i o p
a s d f g h j k l ;
CLEAR PLU X/TIME
z x c v b n m , . /
7 8 9
CAP DOUBLE SPACE SPACE SPACE SPACE SPACE CAP DOUBLE BACK
4 5 6
9 19 29 39 49 59 69 79 89 99
1 2 3
SUBTL
10 20 30 40 50 60 70 80 90 100
0 00 .
CASH
Note: You can program descriptors up to 18 characters, however only the first 16 will
appear on the display.
1. Turn the control lock to the PGM position
2. To begin the program, enter 3 0 0, press the SUBTL key.
3. Press a PLU key on the keyboard you wish to program.
4. Type up to 18 descriptors on the overlay and press the X/TIME key.
5. To program additional PLUs, repeat from step 3, or press the CASH key to finalize the
program.