Specifications
SAM4s ER-900 Series Operator's & Programming Manual v.1.7 P-Mode Programming • 187
Program 700 – Logo/Endorsement Message Programming
Programming the Receipt/Check Endorsement Message
A preamble message of up to six lines can be printed at the top of each receipt; a postamble
message of up to six lines can be printed at the bottom of each receipt, and an endorsement
message of up to ten lines can be printed when a check is endorsed on an optional slip printer.
Each line can consist of up to 32 characters.
1. Turn the control lock to the PGM position.
2. To begin the program, enter 7 0 0, press the SUBTL key.
3. Refer to the chart below and enter the number that represents the line you wish to
program; press the X/TIME key.
X Message Line X Message Line
1
1
st
line of Preamble
12
6
th
line of Postamble
2
2
nd
line of Preamble
13
1
st
line of Endorsement
3
3
rd
line of Preamble
14
2
nd
line of Endorsement
4
4
th
line of Preamble
15
3
rd
line of Endorsement
5
5
th
line of Preamble
16
4
th
line of Endorsement
6
6
th
line of Preamble
17
5
th
line of Endorsement
7
1
st
line of Postamble
18
6
th
line of Endorsement
8
2
nd
line of Postamble
19
7
th
line of Endorsement
9
3
rd
line of Postamble
20
8
th
line of Endorsement
10
4
th
line of Postamble
21
9
th
line of Endorsement
11
5
th
line of Postamble
22
10
th
line of Endorsement
4. If you are programming using an alpha keyboard overlay, type up to 32
descriptors on the overlay and press the SUBTL key. (Note: As you are entering
descriptors only the last 16 descriptors will display.)
If you are programming using descriptor codes, enter up to 32 three-character
codes and press the SUBTL key.
5. Press the CASH key to finalize the program.
X
X/TIME X
CASH
Type up to 32
descriptor keys
SUBTL
SUBTL
Enter up to 32 three-
character codes
7 0 0 SUBTL