Specifications

ER-5200/40/15 Program Mode Programming • 83
Program Mode Programming
Default Programming
• All keyboard PLUs are nontaxable and open, without entry limits by default
status programming of "00000000".
• All system options are set to 0 in default programming, unless otherwise noted.
Change only the options which will deviate from default programming. There is
no need to re-enter an option status of 0, since 0 is its original setting.
• All programming (unless otherwise noted) is done with the control lock in the P
position. Each section details a specific area of register programming.
Descriptor Programming Methods
Descriptors are programmable for PLUs, function keys, groups, clerks and the logo/messages.
There are two methods available to program descriptors, the Program Overlay Method and
the Descriptor Code Method.
This chapter describes both methods. ER5200/40 Use Overlay Method by default and
ER5215 Use Descriptor Code method by default. You can select each method by System
option programming.