Specifications

168 • Program Mode Programming ER-5200/40/15
Program Scans
Since much time and energy has been invested in the planning and programming of your ER-5200/5240/5215, it is
advisable to print a hard copy of the final program for future reference. This copy should be kept in a safe place.
1. Turn the control lock to the P position.
2. To print a program scan, enter 1 5, press the SBTL key.
5 SBTL1
3. In this step, there are three different ways to scan program information. One is
PLU , the other is Macro, The third is Others.
PLU PROGRAM SCAN
To read one PLU program information, enter the number (1-1000) of the PLU and
press the same number and PLU key.
PLU
Enter the PLU#,
up to 15 digits
Enter the PLU#,
up to 15 digits
PLU
Press a PLU key on the keyboard and press same key again.
PLU 1 PLU 1
To read multiple PLU program information, enter the first number (1-1000) and
press PLU key. Press the last number (1-1000)and press PLU key
PLU
Enter the first
PLU#, up to 15
digits
Enter the last
PLU#, up to 15
digits
PLU
Press a PLU key on the keyboard .
PLU 1 PLU 10
MACRO PROGRAM SCAN
To read MACRO information, press the MACRO key to be scanned,
MACRO# MACRO#
Refer to the chart below and enter a digit to represent the segment of the program you
wish to print; press the X/TIME key. To program additional scan, repeat this
operation.