Specifications

156 • Programming Samsung ER 5100/5140 Electronic Cash Register
Programming Group Descriptors
1. Turn the control lock to the P position.
2. To begin the program, enter 9 1 0, press the SBTL key.
0 SBTL19
3. Enter the number (1-20) of the group you wish to program; press the X/TIME key.
X/TIME
4. If you are programming an ER-5100, insert the "Alpha Keyboard Overlay - ER-5100"
shown on page 154. Type up to 12 descriptors by pressing the appropriate descriptor
keys on the alpha keyboard, then press the SBTL key. Repeat from step 3 to program
additional group descriptors, or press the CASH key to finalize the program.
Type up to 12
descriptor keys
SBTL
5. If you are programming an ER-5140, refer to the "Descriptor Code Chart - ER-5140"
on page 154 on and determine the codes for the descriptor you wish to program. Enter
up to 12 three character codes; then press the SBTL key. Repeat from step 3 to
program additional group descriptors.
SBTL
Enter up to 12
three character
codes
6. To program additional groups, repeat from step 3, or press the CASH key to finalize
the program.
CASH