Specifications

Samsung ER 5100/5140 Electronic Cash Register Programming • 155
Group Status and Descriptor Programming
21 Group totals are available to accumulate totals of individual PLUs that are assigned to each
group. Each PLU can be assigned to one or two different groups. (See "Program 150 - PLU Group
Assignment" on page 102 to program PLU groups for each PLU.)
• Use program 900 to assign a group status, i.e. a group can be set to not add to the total
of all groups, or a group can be used to designate like items for kitchen printer
assignment.
• Use program 910 to assign a unique descriptor for each group, so that the group may
be easily understood on the group report.
Program descriptors for the ER-5100 by typing descriptors on the alpha keyboard overlay.
Program descriptors for the ER-5140 by entering three digit alpha character codes. The
keyboard overlay option is not available on the ER-5140.
Programming Group Status - Program 900
1. Turn the control lock to the P position.
2. To begin the program, enter 9 0 0, press the SBTL key.
0 SBTL09
3. Enter the number (1-20) of the group you wish to program; press the X/TIME key.
X/TIME
4. Enter an option digit from the table below, press the SBTL key.
OPTION VALUE = SUM
This group does not add to the group total? Yes = 1
No = 0
This group is a kitchen printer group? Yes = 2
No = 0
SBTL
5. To program additional groups, repeat from step 3, or press the CASH key to finalize
the program.
CASH