Specifications

150 • Programming Samsung ER 5100/5140 Electronic Cash Register
Program 810 - Clerk Descriptor Programming
Program descriptors for the ER-5100 by typing descriptors on the alpha keyboard overlay.
Program descriptors for the ER-5140 by entering three digit alpha character codes. The
keyboard overlay option is not available on the ER-5140.
1. Turn the control lock to the P position.
2. To begin the program, enter 8 1 0, press the SBTL key.
0 SBTL18
3. Enter the number (1-15) of the clerk you wish to program; press the X/TIME key.
X/TIME
4. If you are programming an ER-5100, insert the "Alpha Keyboard Overlay - ER-5100"
shown on page 151. Type up to 12 descriptors by pressing the appropriate descriptor
keys on the alpha keyboard, then press the SBTL key. Repeat from step 3 to program
additional clerks, or press the CASH key to finalize the program.
SBTL
Type up to 12
descriptor keys
5. If you are programming an ER-5140, refer to the "Descriptor Code Chart - ER-5140"
on page 151 and determine the codes for the descriptor you wish to program. Enter up
to 12 three character codes; then press the SBTL key. Repeat from step 3 to program
additional clerks.
Enter up to 12
three character
codes
SBTL
6. Press the CASH key to finalize the program.
CASH