Specifications

Samsung ER 5100/5140 Electronic Cash Register Programming • 105
Program 300 - PLU Descriptor Programming
Program descriptors for the ER-5100 by typing descriptors on the alpha keyboard overlay.
Program descriptors for the ER-5140 by entering three digit alpha character codes. The
keyboard overlay option is not available on the ER-5140.
1. Turn the control lock to the P position.
2. To begin the program, enter 3 0 0, press the SBTL key.
0 SBTL03
3. Select the PLU you wish to program in one of the following ways:
• Press a PLU key on the keyboard, or
PLU
• Press a level key, then an PLU key, or
PLU
LEVEL
1/2/3
• Enter the number of the PLU (1-1000) and press the PLU key, or
PLU
4. If you are programming an ER-5100, insert the "Alpha Keyboard Overlay - ER-5100"
shown on page 106. To use the overlay, press VALID, type up to 12 descriptors by
pressing the appropriate descriptor keys on the alpha keyboard, then press X/TIME.
To program additional PLUs using this method, repeat from step 3, or press the CASH
key to finalize the program.
VALID
Type up to 12
descriptor keys
X/TIME
5. If you are programming an ER-5140, refer to the "Descriptor Code Chart - ER-5140"
on page 106 and determine the codes for the descriptor you wish to program. Enter up
to 12 three character codes; press the X/TIME key.
X/TIME
Enter up to 12
three character
codes
6. To program additional PLUs, repeat from step 3, or press the CASH key to finalize the
program.
CASH