Specifications

ER 390M Electronic Cash Register v1.2 P-Mode Programming • 111
Logo Descriptor Programming
Programming the Receipt
A preamble message of up to six lines can be printed at the top of each receipt; a postamble message
of up to six lines can be printed at the bottom of each receipt, a separate message can be printed on the
DataTran Credit/Debit draft receipt and an endorsement message of up to ten lines can be printed
when a check is endorsed on an optional slip printer. Each line can consist of up to 32 characters.
1. Turn the control lock to the P position.
2. To begin the program, enter 7 0 0, press the SBTL key.
3. Refer to the chart below and enter the number that represents the line you wish to
program; press the X/TIME key.
X Message Line
1
1
st
line of Preamble
2
2
nd
line of Preamble
3
3
rd
line of Preamble
4
4
th
line of Preamble
5
5
th
line of Preamble
6
6
th
line of Preamble
7
1
st
line of Postamble
8
2
nd
line of Postamble
9
3
rd
line of Postamble
10
4
th
line of Postamble
11
5
th
line of Postamble
12
6
th
line of Postamble
13
1
st
line of Datatran Message
14
2
nd
line of Datatran Message
15
3
rd
line of Datatran Message
16
4
th
line of Datatran Message
4. Enter up to 32 three-character codes and press the SBTL key. (See “Descriptor Code
Chart” on page 74.)
Or, insert the Alpha Keyboard Overlay (see “Alpha Program Overlay” on page 74), type
up to 32 characters and press the SBTL key.
5. Press the CASH key to finalize the program.
X
X/TIME X
CASH
7 0 0 SBTL
SBTL
Type up to 32
characters
SBTL
Enter up to 32
three-character
codes