Specifications

SAM4s ER-285M Operator's and Program Manual v1.4 Quick Start Guide • 31

Quick Start Step #5: Basic Operations

Clerk Sign-On

You must sign on a clerk to operate the register. The default ER-285M will allow 15 different

clerks to sign on and operate the register, using the clerk code numbers 1 through 15.

1. Turn the control lock to the REG position. When no clerk is signed on, the display

reads “CLOSED”:

2. To sign on a clerk, enter the clerk number (1 to 15) and press the clerk key.

CLERK

3. The “CLOSED” message no longer displays and the register prints a clerk log in

chit:

DATE 01/10/2007 WED TIME 15:36

X 1 REPORT 00001

********************************

CLERK LOG IN

********************************

CLERK 1 $01

CLERK LOG IN TIME 22:42

CLERK 1 000218 00000

4. To sign the clerk off, enter 0 (Zero) and press the clerk key. The “CLOSED”

message displays and the register prints a clerk log out chit.

0 CLERK

CLOSED