Specifications

26 • Quick Start Guide SAM4s ER-285M Operator's and Program Manual v1.4
To Program Tax & Preset Status
1. Turn the control lock to the PGM position.
2. Enter 100, press the SUBTOTAL key.
3. Select the PLU you wish to program in one of the following ways:
• Press a PLU key on the keyboard, or
1
• Enter the PLU # (up to15-digits) and press the PLU key
PLU
Enter the PLU#,
up to 15 digits
4. Determine the two-digit entry from the chart below. Answer each question and
enter the value that represents your answer in the “=” column. Add the values
for the first three questions to determine the first digit entry; add the values for
the second three questions to determine the second digit entry.
Enter the two digits and press the X/TIME key.
X/TIME
PLU Option Value = SUM
1. PLU is preset?
Yes = 0
N
o = 1
2. Allow preset override?
Yes = 0
N
o = 2
First
Digit
3. PLU is taxable by rate 1?
Yes = 4
N
o = 0
1. PLU is taxable by rate 2?
Yes = 1
N
o = 0
2. PLU is taxable by rate 3?
Yes = 2
N
o = 0
Second
Digit
3. PLU is taxable by rate 4?
Yes = 4
N
o = 0
Examples:
For a preset
PLU taxable by rate 1: enter 40,
For a non-preset
PLU (open PLU) that is non-taxable: enter 10,
For a preset
PLU without override,taxable by rate 1 and rate 2: enter 61
5. Repeat steps 3 and 4 for each PLU you wish to program.
6. Press the CASH/TEND key to end programming. The tax status you have
entered will display and print on the printer.
CASH/
TEND