Specifications

SAM4s ER-285M Operator's and Program Manual v1.4 Program Mode Reference Guide • 189
Programming the Macro Name
Up to ten function locations may be designated as Macro keys. You may wish to program a
name for a macro. For example if a macro executes a Series of commands to produce daily
reports, you can program the descriptor “DAILY”, so the macro can easily be identified.
Macro names can also be helpful when looking at keyboard layout information with the PC
communication utility.
1. Turn the control lock to the PGM position.
2. To begin the program, enter 7 1 1, press the SUBTOTAL key.
1
SUB
TOTAL
1 7
3. Refer to the chart below and enter the number that represents the line you wish
to program; press the X/TIME key.
X X/TIME
4. If you are programming using alpha overlay;
SUB
TOTAL
Type up to 18
descriptor keys
or,
Enter up to 18
three-character
codes
SUB
TOTAL
5. Press the CASH key to finalize the program.
CASH