Specifications

SAM4s ER-285M Operator's and Program Manual v1.4 Program Mode Reference Guide • 181
Group Programming
Group totals are available to accumulate totals of individual PLUs that are assigned to each
group. Each PLU can be assigned to one, two or three different groups. (The number of
groups is determined by memory allocation. The default is 20 groups; the maximum is 99.)
• Use program 900 to assign a group status, i.e. a group can be set to not add to the
total of all groups, or a group can be used to designate like items for kitchen
printer assignment.
• Use program 910 to assign a unique descriptor for each group, so that the group
may be easily understood on the group report.
Programming Group Status - Program 900
1. Turn the control lock to the PGM position.
2. To begin the program, enter 9 0 0, press the SUBTOTAL key.
0
SUB
TOTAL
0 9
3. Enter the number of the group you wish to program; press the X/TIME key.
X/TIME
4. Enter an option digit from the table below, press the SUBTOTAL key.
Address OPTION VALUE = SUM
Group total is added to the total of all
groups on the Group report?
Yes = 0
No = 1
N1
Send to kitchen printer? Yes = 2
No = 0
No Choice
KP PORT#: R (print a kitchen requisition)
KP PORT#: 1
N2
KP PORT#: 2
0
1
2
4
N3
KP PORT#: 3 Yes = 1
No = 0
N4
Print red on KP? Yes = 1
No = 0
N5
Gift Card Function: None = 0
Activate = 1
Add = 2
N2
SUB
TOTAL
N1 N3 N5 N4
5. To program additional groups, repeat from step 3, or press the CASH key to
finalize the program.
CASH