Specifications

SAM4s ER-285M Operator's and Program Manual v1.4 Program Mode Reference Guide • 177
Program 810 – Clerk Description Programming
By default, descriptors are programmed by entering three-digit alpha codes. If you
wish to program descriptors by typing descriptors on the alpha keyboard overlay you
must select ‘Yes’ in system option #32 (See “System Option Programming” on page 138).
1. Turn the control lock to the PGM position.
2. To begin the program, enter 8 1 0, press the SUBTOTAL key.
0
SUB
TOTAL
1 8
3. Enter the number of the clerk you wish to program; press the X/TIME key.
X/TIME
4. If you are programming using alpha overlay;
SBTL
Type up to 18
descriptor keys
or,
Enter up to 18
three-character
codes
SBTL
5. Press the CASH key to finalize the program.
CASH