Specifications

150 • Program Mode Reference Guide SAM4s ER-285M Operator's and Program Manual v1.4
Program 70 - Function Key Options – General Instructions
Use Program 70 to set options for function keys. Because of the differences inherent in
function keys, individual options will be different. See the specific instructions for each key
that follow the general instructions.
1. Turn the control lock to the PGM position.
2. To begin the program, enter 7 0, press the SUBTOTAL key.
0
SUB
TOTAL
7
3. Enter the values for the option digit or digits. Depending on the function key
you are programming, you may enter up to six digits N1 through N6.
Determine the values for N1 through N6 by referring to the specific function
key information that follows. (You do not need to enter preceding zeros. For
example, if the function key offers six digits, N1 through N6 and you are only
selecting a value for N6, just enter the value for N6.) Press the function key
you wish to program.
N3N2 N1 N4 N5
FUNCTION
KEY
N6
4. To program additional function keys, repeat from step 3, or press the CASH
key to finalize the program.
CASH