Specifications

148 • Program Mode Reference Guide SAM4s ER-285M Operator's and Program Manual v1.4
Program 80 - Function Key Descriptor
By default, descriptors are programmed by entering three-digit alpha codes. If you
wish to program descriptors by typing descriptors on the alpha keyboard overlay you
must select ‘Yes’ in system option #32 (See “System Option Programming” on page 138).
1. Turn the control lock to the PGM position.
2. To begin the program, enter 8 0, press the SUBTOTAL key.
0
SUB
TOTAL
8
3. If you are programming alpha overlay
X/TIME
Type up to 18
descriptor keys
FUNCTION
KE
Y
or,
Enter up to 18
three-character
codes
FUNCTION
KEY
4. To program additional function keys, repeat from step 3, or press the CASH
key to finalize the program.
CASH
#/NS Key Descriptor Program Note
Since two distinct functions, # entry and no sale, reside on the same key, different programs are
used to program each descriptor.
• To program the no sale descriptor use program 80 (Enter 80, press SUBTOTAL)
• To program the # key descriptor, use program 81 (enter 81, press SUBTOTAL)