Specifications

130 • Program Mode Reference Guide SAM4s ER-285M Operator's and Program Manual v1.4
Program 110 - PLU Auto Tare Programming
1. Turn the control lock to the PGM position.
2. To begin the program, enter 1 1 0, press the SUBTOTAL key.
0
SUB
TOTAL
1 1
3. Select the PLU or PLUs you wish to program in one of the following ways:
• Press a PLU key on the keyboard, or
PLU
• Press the first PLU keys that are to receive the same status and Press the
last PLU keys, or
PLU PLU
• Enter up to 15 digit number of the PLU and press the PLU key, or
PLU
Enter the PLU#,
up to 15 digits
• Enter the number of the first PLU in a range of PLUs that are to receive the
same setting; press the PLU key. Enter the last number in the range; press
the PLU key.
PLU
Enter the PLU#,
up to 15 digits
Enter the PLU#,
up to 15 digits
PLU
4. Enter a value (1-5) to indicate the number of the preprogrammed tare weight you
want to automatically subtract when the PLU is used for scale entry (using an
optional scale). Enter 0 to disable automatic tare subtraction.
X/TIME N
5. Repeat from step 3 to program additional PLUs, or press the CASH key to
finalize the program.
CASH