Specifications

128 • Program Mode Reference Guide SAM4s ER-285M Operator's and Program Manual v1.4

Program 100 - PLU Status Programming

1. Turn the control lock to the PGM position.

2. To begin the program, enter 1 0 0, press the SUBTOTAL key.

SUB

TOTAL

0 1

3. Select the PLU or PLUs you wish to program in one of the following ways:

• Press a PLU key on the keyboard, or

PLU

• Press the first PLU keys that are to receive the same status and Press the

last PLU keys, or

PLU PLU

• Enter up to 15 digit number of the PLU and press the PLU key, or

PLU

Enter the PLU#,

up to 15 digits

• Enter the number of the first PLU in a range of PLUs that are to receive the

same setting; press the PLU key. Enter the last number in the range; press

the PLU key.

PLU

Enter the PLU#,

up to 15 digits

Enter the PLU#,

up to 15 digits

PLU

4. Refer to the "PLU Status Chart" to determine the values for N1 through N9. (If

an address offers more than one option, add the values for each option and enter

the sum. For example, if you wish the PLU to be taxable by rates 1 and 3, add

the values for your choices, 1 + 4, and enter the sum "5" for address N5.) Enter

the values you have selected, press the X/TIME key. (You do not need to

enter preceding zeros. For example, if you are only selecting a value for N9,

i.e. taxable by tax 1, just enter 1.)

N3N2 N1 N4 N5 X/TIME N6 N7 N8

5. To program additional PLUs, repeat from step 3, or press the CASH key to

finalize the program.

CASH