Specifications

SAM4s ER-285M Operator's and Program Manual v1.4 Service Mode Reference Guide • 111
To Set Memory Allocation
1. Turn the control lock to the S position.
2. Enter 60, and then press the SUBTOTAL key.
0
SUB
TOTAL
6
3. Refer to the chart below. Enter the index number and press the X/TIME key.
X X/TIME
X Memory Area
1 PLU
2 CLERK*
3 GROUP
4 CHECK#*
5 SOFT CHECK LINE
6 CHECK TYPE : Hard (1), Soft (0)
7 PRICE LEVEL
8 MIX AND MATCH
9 ELECTRONIC JOURNAL
4. Enter the quantity to allocate for the memory item and press the CASH key.
CASH
Quantity
5. If you wish to allocate another memory area, repeat steps number 3 and 4.
6. Press CASH to exit the memory allocation program. The current allocation
will print.
CASH
NOTE: The number of clerks cannot exceed the number of checks allocated. For
example, if you wish to allocate 20 clerks, you must also allocate at least 20 checks.