Operation and programming manual

ER-260/265 Electronic Cash Register AU Operating Instructions • 21

Clerk Operations

If you wish to use the clerk system, you must first activate the clerk system by setting system option

#16. See “System Option Programming”. You can activate the clerk system for stay down or pop-

up mode.

• Stay down means that once a clerk is signed on, the same clerk will remain signed on until a

different clerk signs on or the original clerk signs off. A stay down clerk system might be

used when only one operator uses the register at a time, and a different operator begins

when a work shift is changed.

• Pop-up means that the clerk is automatically signed off at the end of each transaction.

Therefore, to begin a transaction, you must first sign a clerk on. A pop-up clerk system

might be used in a department store, where several clerks might use the register during the

same shift, and clerk sales information is required.

Clerk Sign On

To sign On/Off Clerk, need to turn key to REG Mode.

♦ To sign on, enter the secret code and press the CLERK key, or press the CLERK key, then

enter the secret code and press the CLERK key again.

CLERK

Secret

Code

CLERK

Secret

Code

CLERK

Clerk Sign Off

♦ To sign off, enter 0, press the CLERK key.

CLERK 0