Specifications

ER230 Series Operating Instructions • 11
specific function, such as item discount or surcharge, or sale discount or
surcharge. The percent rate may be entered or preprogrammed, or the percent
keys can be programmed with a negative, open or preset price, thus acting as
coupon keys.
A percentage key may also be set up to accept charge tip entries.
PLU
The PLU key is used to register price look ups by number entry. PLUs can be
programmed open or preset, and positive or negative.
PROMO
The PROMO key allows you to account for PROMOal items.
Pressing this key
will remove an item's cost from the sale, but will include the sale of the item in
the item's sales counter.
RECD ACCT
The RECD ACCT (received on account) key is used to record media loaned to
the cash drawer, or payments received outside of a sale. The cash drawer will
open. The amount received adds to the cash-in-drawer total.
SUBTOTAL
Displays subtotal of sale including tax. Must be pressed prior to a sale discount
or sale surcharge.
TAX EXEMPT
Press the TAX EXEMPT key to exempt tax 1, tax 2, tax 3, and/or tax 4 from
the entire sale.
TAX (1-4) SHIFT
When pressed before a PLU entry, the tax shift keys reverse the tax status of the
PLU, i.e., a PLU with non-tax status would become taxable or a PLU with tax
status would become non-taxable.
VOID
Use to correct an item entered earlier within a sale. The VOID key corrects the
appropriate totals and counters. To correct the last item, use the ERROR CORR
key. For void operations outside of a sale (Transaction Void), use the VOID
position on the control lock. The Financial report records totals for each type of
void separately.
VALID
Press the VALID key to print a one-line validation on a separate form or piece of
e
m registration, discount or payment may be validated.
WASTE
The WASTE key allows control of inventory by accounting for items, which
must be removed from stock due to spoilage, breakage or mistakes. Press the
WASTE key before entering wasted items, then press the WASTE key again to
finalize.
MODE
Use to change current mode. There are two methods.
1. Just press the mode key. The mode will be changed sequentially.
2. Press a specific number and the mode key.
(VOID:1, OFF:2, REG:3, X:4, Z:5, P:6, S:7)
Example) 5 + mode key => The mode will be changed to Z mode.
Additionally you can control the back-light by using this key.
*100 + MODE key => Turning on or off the back-light. (It will be toggled)