Specifications

Clear Random Access Memory (RAM) and

Initialize Cash Register

1. Before plugging register in, place key lock in the S position.

2. Connect the AC plug into a power outlet while pressing the

00 keys.

3. RAM is now cleared of all memory and the register prints a line

of decimals ().

NOTE: This is a one time only procedure to be performed after

the battery is first installed. DO NOT CLEAR RAM ONCE

THE REGISTER IS PROGRAMMED OR ALL PROGRAMS

AND TOTALS WILL BE ERASED.

Tax Rate Programming

The ER-180 may be programmed to tax items at either a straight

percentage tax rate, or a tax table.

Entering a Straight Percentage Tax Rate

The ER-180 will accept a 5 digit tax rate, with the decimal point fixed at

three places (00.000). If your area taxes goods based on a straight

percentage, enter the rate in the following manner.

1. Place the key lock in the P position.

2. Press 1 and then enter the five digit tax rate.

3. Press TAX.