Instruction Manual
Maintenance
Clean your rie's exterior with a good-quality silicone product. Apply the silicone to a lint-
free cloth and then wipe down the rie's exterior.
Do NOT leave the air ller hole exposed. Always rotate the protective cover when not lling
the gun with air.
Do NOT rely solely on the safety to provide guaranteed safety. YOU are the ultimate safety
for your gun.
Do NOT leave pellets loaded in the breech of the rie. Always remove ammunition from the
rie when you are done shooting.
Do NOT ll the rie quickly with air. If it is charged too quickly, it can dislodge the valve
from its seat, cause excess heat buildup and give inaccurate ll pressure readings.
Do NOT the rie beyond the ll pressure stated on the front of this manual. Overlling the
gun could be dangerous, damage the rie, deliver substandard performance and cause it to
malfunction.
Do NOT use mineral-based oils or greases.
Do NOT use petroleum-based oils or greases.
Use only silicone grease (available in dive shops) on the o-rings. Any other lubricants will
void your warranty, may damage your gun and could be dangerous (cause an explosion).
Troubleshooting
Do not use this rie until you have read and understood this owner's manual.
In the unlikely event your rie malfunctions or exhibits reduced performance, DO NOT
attempt to x the problem yourself. Please call Air Venturi to address any issues. They may
ask you to return the gun for repair.
Air Venturi service line: 216-220-1180
Clearing a jammed pellet/bullet
Before proceeding, point your rie in a safe direction.
Set the safety. Open the breech cover. Use a coated metal rod designed for cleaning ries
to clear the barrel. Push it through from the muzzle to the breech. The jammed projectile
should come out.
11