Instruction Manual
Rules of safe shooting ........................................................... 3
Safety ................................................................................... 4
Installing cocking bolt .......................................................... 4
Fill your rie with a hand pump ........................................... 5
Fill your rie with a scuba tank ............................................. 6
Uncocking/cocking .............................................................. 7
Sight adjustment ................................................................... 8
Loading your rie ................................................................. 9
Cleaning the barrel ............................................................... 9
Clearing a jammed pellet/bullet ............................................ 9
Warranty ............................................................................ 10
Warnings ............................................................................ 11
2
Maintenance
Clean your rie's exterior with a good-quality silicone product. Apply the silicone
to a lint-free cloth and then wipe down the rie's exterior.
• Do NOT leave the air ll hole exposed. Always rotate the protective cover when
not lling the gun with air.
• Do NOT rely solely on the safety to provide guaranteed safety. YOU are the
ultimate safety for your gun.
• Do NOT leave pellets loaded in the breech of the rie. Always remove ammuni-
tion from the rie when you’re done shooting.
• Do NOT quickly ll the rie with high-pressure air. If it’s charged too quickly, it
can dislodge the valve from its seat, cause excess heat buildup and give inaccu-
rate pressure readings.
• Do NOT ll the rie beyond the ll pressure stated on the front of this manual.
Overlling the gun could be dangerous, damage the rie, deliver substandard
performance and cause it to malfunction.
• Do NOT use mineral-based oils or greases.
• Do NOT use petroleum-based oils or greases.
Use only silicone grease (available in dive shops) on the o-rings. Any other lu-
bricants will void your warranty, may damage your gun and could be dangerous
(cause an explosion).
Troubleshooting
Do not use this rie until you have read and understood this owner's manual.
In the unlikely event your rie malfunctions or exhibits reduced performance, DO
NOT attempt to x the problem yourself. Please call Air Venturi to address any
issues. They may ask you to return the gun for repair.
Air Venturi service line: 216-220-1180