User's Manual
Table Of Contents
- List of Contents
- List of Figures
- List of Abbreviations
- 1 General
- 2 Overview
- 2.1 Compatibility with Other Systems
- 2.2 AIS 3410 in RADARPILOT 1000/1100 Systems
- 2.3 AIS 3410 in 1000/1100 Series Systems (NACOS xx-4 and xx-5)
- 2.4 AIS 3410 in CHARTPILOT Stand-alone Systems
- 2.5 AIS 3410 in NACOS xx-3 Systems (Radar 9xxx and CHARTPILOT)
- 2.6 AIS 3410 in Radar 9xxx Systems with RADARPILOT 1000/1100
- 2.7 AIS 3410 in Radar 9xxx Systems
- 2.8 Housing of the 3410 Electronics Unit
- 2.9 Replacement of AIS Electronics Unit
- 2.10 Media Converter Installation (necessary for ships with BNC LAN networks)
- 3 Installation Recommendations
- 3.1 General Recommendations
- 3.2 Specific Recommendations
- 3.2.1 Recommendations Concerning AIS Systems
- 3.2.2 Recommendations Concerning the Installation of the Electronics Unit
- 3.2.3 Recommendations Concerning the Installation of the Antennas
- 3.2.4 Recommendations Concerning Redundancy
- 3.2.5 Recommendations Concerning the Connection of a (D)GPS to AIS 3410
- 3.2.6 Emergency Power Source
- 3.2.7 Pilot Port, Connector/Cable Kits
- 3.2.8 Recommendations Concerning AIS Stand-alone with Radar 9xxx / NACOS xx-2/-3
- 3.2.9 Recommendations Concerning the Connection to a Radar 1000/1100 Series System
- 3.2.10 Recommendations Concerning the Connection to a Radar 1100 Series System
- 4 Functional Description
- 4.1 Block Diagram
- 4.2 Termination
- 4.3 Description of the Components
- 4.3.1 AIS 3410 Electronics Unit
- 4.3.1.1 Interfaces
- 4.3.1.2 Internal Connectors
- 4.3.1.3 Supported Sensor Input Sentences
- 4.3.1.4 Supported Sentences for the AIS Primary Display Port and the Pilot Port
- 4.3.1.5 Supported Sentences for the Long Range Port
- 4.3.1.6 Supported Sentences for the Internal Position Sensor
- 4.3.1.7 IEC 61162 -1/-2 Interfaces, Electrical Characteristics
- 4.3.1.8 Example for the Interconnection
- 4.3.2 VHF Antenna
- 4.3.3 GPS Antenna
- 4.3.4 Pilot Port
- 4.3.1 AIS 3410 Electronics Unit
- 5 Setting-to-Work/Configuration
- 6 Repair/Maintenance
- 7 Technical Data
- 8 Fault Code List
- 9 Cabling Documents
- 10 Outline Drawings
- Notes
AIS 3410, Electronics Unit
ED3047G842 / 01 (2009-08)
Technical Manual
8 Fault Code List
t_ue_e09.fm / 27.08.09
64
029
AIS: No valid SOG
information
AIS NO SOG
Generated by: AIS Electronics Unit
Cause/Source: No data from external sensor and from
internal position sensor
Reaction: The Electronics Unit continues operation.
Remedy: The telegrams VBW, VTG, RMC can not be
received. Check the sensor and the cabling; Check if the
system that transmits the data is working (RADARPILOT
1x00); Check the baud rate settings of the sensor inputs.
030
AIS: No valid COG
information
AIS NO COG
Generated by: AIS Electronics Unit
Cause/Source: No data from external sensor and from
internal position sensor
Reaction: The Electronics Unit continues operation.
Remedy: The telegrams VTG, RMC can not be received.
Check the sensor and the cabling; Check if the system that
transmits the data is working (RADARPILOT 1x00); Check
the baud rate settings of the sensor inputs.
032
AIS: Heading lost/
invalid
AIS NO HEADING
Generated by: AIS Electronics Unit
Cause/Source: No data from external sensor
Reaction: The Electronics Unit continues operation.
Remedy: The telegrams HDT can not be received. Check the
sensor and the cabling; Check if the system that transmits
the data is working (RADARPILOT 1x00); Check the baud
rate settings of the sensor inputs.
035
AIS: No valid ROT
information
AIS NO ROT
Generated by: AIS Electronics Unit
Cause/Source: No data from external sensor
Reaction: The Electronics Unit continues operation.
Remedy: The telegrams ROT can not be received. Check the
sensor and the cabling; Check if the system that transmits
the data is working (RADARPILOT 1x00); Check the baud
rate settings of the sensor inputs.
051
AIS: Channel
management infor
-
mation not accepted
AIS SET CHANNELS
Generated by: AIS Electronics Unit
Cause/Source: E.g. overlapping with an existing area
Reaction: The Electronics Unit continues operation.
Remedy: Check the channel management information.
052
AIS: GPS receiver
fault
AIS GPS RECEIVER
Generated by: AIS Electronics Unit
Cause/Source: Internal GPS receiver malfunction
Reaction: The Electronics Unit continues operation without
internal GPS data and without direct GPS time synchroniza-
tion.
Remedy: The Electronics Unit must be exchanged.
053
AIS: GPS antenna
not connected or
defective
Generated by: AIS Electronics Unit.
Cause/Source: No connection with the GPS antenna
Reaction: The AIS Electronics Unit continues operation
without direct GPS syncronisation.
Remedy: Renew proper connection with the GPS antenna
and/or substitute the defective GPS antenna.
Fault
Messages at
Error Message generated by,
Possible Cause/Source,
Reaction of the System,
Remedy
1000/1100 Series,
CHARTPILOT,
MULTIPLOT 910x
(Chart Mode)
Radar 9xxx, MULTIP-
ILOT 910x (Radar
Mode)