User's Manual
Table Of Contents
- List of Contents
- List of Figures
- List of Abbreviations
- 1 General
- 2 Overview
- 2.1 Compatibility with Other Systems
- 2.2 AIS 3410 in RADARPILOT 1000/1100 Systems
- 2.3 AIS 3410 in 1000/1100 Series Systems (NACOS xx-4 and xx-5)
- 2.4 AIS 3410 in CHARTPILOT Stand-alone Systems
- 2.5 AIS 3410 in NACOS xx-3 Systems (Radar 9xxx and CHARTPILOT)
- 2.6 AIS 3410 in Radar 9xxx Systems with RADARPILOT 1000/1100
- 2.7 AIS 3410 in Radar 9xxx Systems
- 2.8 Housing of the 3410 Electronics Unit
- 2.9 Replacement of AIS Electronics Unit
- 2.10 Media Converter Installation (necessary for ships with BNC LAN networks)
- 3 Installation Recommendations
- 3.1 General Recommendations
- 3.2 Specific Recommendations
- 3.2.1 Recommendations Concerning AIS Systems
- 3.2.2 Recommendations Concerning the Installation of the Electronics Unit
- 3.2.3 Recommendations Concerning the Installation of the Antennas
- 3.2.4 Recommendations Concerning Redundancy
- 3.2.5 Recommendations Concerning the Connection of a (D)GPS to AIS 3410
- 3.2.6 Emergency Power Source
- 3.2.7 Pilot Port, Connector/Cable Kits
- 3.2.8 Recommendations Concerning AIS Stand-alone with Radar 9xxx / NACOS xx-2/-3
- 3.2.9 Recommendations Concerning the Connection to a Radar 1000/1100 Series System
- 3.2.10 Recommendations Concerning the Connection to a Radar 1100 Series System
- 4 Functional Description
- 4.1 Block Diagram
- 4.2 Termination
- 4.3 Description of the Components
- 4.3.1 AIS 3410 Electronics Unit
- 4.3.1.1 Interfaces
- 4.3.1.2 Internal Connectors
- 4.3.1.3 Supported Sensor Input Sentences
- 4.3.1.4 Supported Sentences for the AIS Primary Display Port and the Pilot Port
- 4.3.1.5 Supported Sentences for the Long Range Port
- 4.3.1.6 Supported Sentences for the Internal Position Sensor
- 4.3.1.7 IEC 61162 -1/-2 Interfaces, Electrical Characteristics
- 4.3.1.8 Example for the Interconnection
- 4.3.2 VHF Antenna
- 4.3.3 GPS Antenna
- 4.3.4 Pilot Port
- 4.3.1 AIS 3410 Electronics Unit
- 5 Setting-to-Work/Configuration
- 6 Repair/Maintenance
- 7 Technical Data
- 8 Fault Code List
- 9 Cabling Documents
- 10 Outline Drawings
- Notes
AIS 3410, Electronics Unit
ED3047G842 / 01 (2009-08)
Technical Manual
6 Repair/Maintenance
6.3 Software Update
t_ue_e07.fm / 27.08.09
55
You are now requested to fill in your username and password. Afterwards you are redirected to the
folder with the newest zip file containing the software for all components of the AIS system. The
unpacked zip file can be saved on a CD ROM.
It is not permissible to modify any settings in the SAM-CMIS system. To leave the system click on Tools
-> Log-out.
Overview/Hints
A table of the software versions, their compatibility and the corresponding versions of the manuals is
shown in a README-file which is part of the downloaded zip file.
6.3.2 Determination of the Current Software Versions
AIS 3410 with RADAR/CHARTRADAR/MULTIOPILOT 1000/1100
Open the System Maintenance Manager by clicking Menu -> Utilities -> Maintenance. Select the
register card Telemonitoring Data and click on the Version button at the lower left.
The software versions of the radar and of connected systems are displayed. Use the scrollbar to
search for the AIS software versions.
AIS 3410 with RADAR 9x00 and MULTIPILOT 910x (Radar Mode):
Press the Menu button. Select Utilities -> Self Check -> Version.
Use the CANCEL/MORE button to toggle through the pages until the AIS page is reached.
AIS 3410 with MULTIPILOT 910x (ECDIS Mode):
Open the tree structure by clicking the Tree button.
Click on System Maintenance -> Version... to display the software versions of the MULTIPILOT
and all connected systems.
6.3.3 Serial Cable Connection
Connection at the PC/Laptop
The serial cable must be
connected to COM 1 of the PC/
Laptop.
Fig. 6-5 Connection to the Laptop
COM 1
z_ue_050.jpg
z_ue_051.jpg