User's Instructions

ED 3047 G 122 / – (2002-12)
Operating Instructions
5 AIS Settings, Voyage Data and Other Displays
5.5 Displaying the AIS State
b_ai_e05.fm / 19.12.02
31
DCU DEBEG 3401
5.5 Displaying the AIS State
The status of the sensors connected to the Electronics Unit is displayed in the dialog AIS STATE.
.
BACK
External
ROT:
POSITION:
SOG/COG:
HEADING: Valid
External
Other source
ROT: Other source means
that an approved ROT
sensor is not being used,
and so only the direction but
not the rate of the heading
change is transmitted. In this
case, only the direction of
turn (port/starboard
manoeuvre) is displayed.
STATE
DGNSS
UTC: Clock OK
External means that the
GPS receiver connected
externally to the AIS Electro-
nics Unit is being used for
this purpose.
Internal means that the
internal GPS receiver in the
AIS Electronics Unit is being
used for this purpose.
AIS
1. Press MENU.
2. In the menu, mark STATE by means of the ArrowUp/ArrowDown keys; press ENTER
Back: Press BACK twice.
Operating Sequence