User's Instructions

ED 3047 G 122 / – (2002-12)
Operating Instructions
5 AIS Settings, Voyage Data and Other Displays
5.3 Channel Management
b_ai_e05.fm / 19.12.02
29
DCU DEBEG 3401
Viewing of Data Sets for the Electronics Unit Settings
The data set that is currently being used by the Electronics Unit is displayed if the CHANNEL MANAGE-
MENT dialog is opened.
In the top line, the status of the displayed data set is indicated there:
Before DATA SET:
- DEFAULT: Default values
- AIS: Data have been received via one of the VHF transceivers.
- DSC: Data have been received via the DSC transceiver.
- MANUAL: Data have been entered manually.
After DATA SET:
- USED: The data currently being used by the Electronics Unit
- NOT USED: Data are currently not being used by the Electronics Unit.
- EDITED: The displayed data have been altered manually but have not yet been stored.
Below that, the settings of the two VHF transceivers are shown, as well as the geographical region and
the transition zone.
If the transceiver has stored several data sets, these can be displayed by means of NEXT.
1. Press MENU.
2. In the menu, mark CHANNEL by means of the ArrowUp/ArrowDown keys and press
ENTER.
3. If necessary, display the other data sets by means of NEXT.
Back: Press ABORT, and then press BACK.
Operating Sequence
APPLY
Changes occur only
in exceptional cases
after the ship's
command personnel
have been informed;
for explanations, see
text
NEXT
CHANNEL
TRANSITION
SOUTHWEST
LON
REGION:
CHANNEL
TRANSMITTER:
A
NORTHEAST
TRANSMISSION
CHANNEL
On
RECEIVER:
No.: 2086
BANDWIDTH: 12.5kHz
On
POWER LEVEL: High
LAT 55:34.00
037:48.00
55:30.00
037:44.00
ZONE: 1NM
N
W
N
W
>
MANAGEMENT
BCHANNEL
On
2087
12.5kHz
On
DEFAULT DATA USEDSET
Changes over to the
other data sets.
Botton exists only if
several data sets
are available.
1/3
1/5 = data set 1 of 3
ABORT
Alterations made are
rejected
Generates a new
data set.
Botton exists only if
data has been
changed.