User's Instructions

DCU DEBEG 3401
ED 3047 G 122 / – (2002-12)
Operating Instructions
4 AIS Messages
4.2 Transmitting Safety Messages
b_ai_e04.fm / 19.12.02
24
Alphanumerical Selection of the Addressee
Call up the dialog SEND SAFETY MESSAGE, and set the entry TO ALL to Off. In the ADDRESSED TO
MMSI field which is displayed, enter the MMSI number of the addressee. In the message field, edit the
message; and by pressing SEND, send the message.
If, after the pressing of SEND, the transmission of the message fails to take place, the alarm Safety msg
transmission failed appears.
☞ The cause of this can be that an incorrect MMSI number has been entered and that, as a result, no
confirmation of reception has been received from the addressee.
1. Press MENU.
2. In the menu, mark SEND MSG. by means of the ArrowUp/ArrowDown keys and press
ENTER.
Then, in the SEND SAFETY MESSAGE dialog:
3. If On is entered in the TO ALL field:
- Mark the TO ALL field by means of the ArrowUp/ArrowDown keys and press
ENTER
- with one of the arrow keys, set the entry to Off and press ENTER.
4. With the ArrowUp/ArrowDown keys, mark the ADDRESSED TO MMSI field and press
ENTER.
5. Enter the MMSI number of the addressee there, and press ENTER.
6. With the ArrowUp/ArrowDown keys, mark the MESSAGE field, and edit the message.
Complete the editing process by means of ENTER.
7. Press SEND.
Back to the Situation Display: Press BACK.
Operating Sequence