User's Instructions

ED 3047 G 122 / – (2002-12)
Operating Instructions
4 AIS Messages
4.1 Receiving Safety Messages
b_ai_e04.fm / 19.12.02
21
DCU DEBEG 3401
4 AIS Messages
4.1 Receiving Safety Messages
When the AIS system receives a Safety Message from another ship or base station, the alarm New
safety message appears.
After the alarm acknowledgement, the received message is displayed in the dialog READ SAFETY
MESSAGE, together with the identification data of the sender.
Display of the Messages Received Last
The last received five Safety Messages can be displayed. Switch-over is performed by means of NEXT.
Messages that have not yet been displayed are marked (new). Messages which have already been
displayed are marked (known).
☞ If several messages have been received before the alarm list is opened, no alarm repetition takes
place for the messages which have already been viewed in this way.
1. Press ALARM.
2. In the dialog ALARM LIST, acknowledge the marked alarm-message New safety
message by pressing ACKNOWLEDGE.
As a result, the dialog READ SAFETY MESSAGE opens up, in which the received
message is displayed together with the identification data of the sender.
Back: Press BACK twice.
Operating Sequence
READ
BACKNEXT
721562451
CALLSIGN:ADRF1 MS HAVARIA MMSI:
GROUNDING LAT:50:58.231 N LON:00
14.0NM
NAME
CALL
MMSI
1:17.435 E TIME:DEC 17 13:11 UTC
BEARING
POSITION
MESSAGE:
LON
SAFETY MESSAGE
375289351
DRSTZ
MS BREMEN
LAT 50:08.357
006:46.735
RANGE
082°
N
E
Identification data
of the sender
Data at the time
when the message
was received
Content of the
Safety Message
Back to the menu
Page selection
between the five
Safety Messages
received last
BROADCAST
Statement of whether
the message was
broadcast generally
(BROADCAST
MESSAGE) or was
sent to your ship only
(ADDRESSED
MESSAGE)
(new): Message
has not yet been
displayed
(known): Message
has already been
displayed
(new)
1/5
SIGN
1/5 = message 1 of 5