Specifications

7
• After selection of a cooking procedure and OK, you must set – time – or core temperature.
1. Input time 2. Input core temperature 3. Input lines
• Four-figure time display from 00:00 to 23:59.
1. Time: Basic setting is 00:00 move arrow  to get to ∞ = continuous operation.
Time setting is 23:59 move arrow
 and you get again ∞ = continuous op.
Setting is ∞ move arrow
 and you get to 23:59
Setting is ∞ move arrow
 and you get to 00:00
2. Core Temperature: Core temperature range from 0°C to 99°C.
3. Use the direction arrows  and  to change between the input fields for time, core temperature and
the Climatic Cursor for Temperature/Humidity.
3.2 Manual operation – Input of one step
• Input parameters, “temperature/humidity“ and “time“ or “core temperature“ and
start the Combi-steamer
LED START is lit.
• If desired, you can activate the preheating by pressing the key PreHeat see Sec. 9.
• The Climatic Monitor indicates data of the advancing program.
Manual operation Manual operation
with time setting with core temperature
• There are yellow bars in the input fields indicating the current state of the program.
• Time: Bar is getting shorter to the left, time is running down.
• Core temperature: Bar is getting longer to the right until the desired core temperature is reached.
• Man. Steam: An additional manual humidification is always possible as long the key “Man. Steam” is
pressed.
• A sound signal announces the end of the program.
Remaining
time
Set time
Set temperature
and humidity
Actual core
temperature
Set core
temperature
Manual
steam
Change
Step
Combi-
cooking
Manual
steam
Change
Step
Combi-
cooking
Menu
back
Save
Next
Step
Preheat
OFF
Menu
back
Save
Next
Step
Preheat
OFF
Menu
back
Save
Next
Step
Preheat
OFF