Specifications

14. Communication ProConnect ↔ Combi steamer

14.1 Start up communication ProConnect ↔ Combi steamer

• Use the appropriate cable to establish a communicating connection between PC and combi

steamer, “Point-to-Point” connection RS 232.

• Plug the connecting cable to external SubD9 port in the hose shower tulip and connect

the other end to the PC.

• The combi steamer is in standby mode, it may be necessary to switch off the combi steamer.

• The PC is switched on and ProConnect is started

• Set the device address of the combi steamer in the PCPrg:

Menue/Options/device address.

• Set Com-Port in the PCPrg to the one used as interface for the connection

PCPrg ↔ Combi steamer.

• Provided the connection is established via USB-Port of the PC and USB/RS 232 adapter, this

interface is also indicated as Com-Port on the PC.

• It is possible to test the communication in the set-up dialog for device address and port,

“check communication”.

• Of course, there are further individual possibilities for connection and connectivity via RS 485

systems.

• Contact our Service Hotline or our sales department for further information.

14.2. Connection to Kitchen control systems (KCS)

• In case special hard/software is available, a connection to kitchen control systems is possible.

15. Accessories - Optional Extras

Lower rack/support 6x2/3 open, 10 levels

Wall brackets 1 pair

Fat/grease filter Recommendation: Additional filter for changing

Cleaning agent

Original MULTI CLEAN special

1 l spray-pistol bottle

10 l refill bin

Pressure pump sprayer Contents 1,5 l

Grids GN 2/3 chromium plated or stainless steel

Baking trays GN 2/3 20 mm stainless steel or enamelled

aluminium perforated and/or silicone coated

Pans GN 2/3 40, 65, 100 mm deep

stainless steel or enamelled, perforated or closed

RS 232

Connection