Specifications

- 9 -
3. Starting the Combi Steamer
Prior to start: Open water tap!
In case the ambient temperature is lower than + 5°C / +41°F, the oven must be warmed to
room temperature.
Press ON/OFF, key is lit, oven chamber illuminated, the oven is ready for work.
Program display indicates c1, basic setting is steaming, temperature display indicates
99°C.
3.1 Input of operating data and start with only one cooking mode
Select desired mode by pressing corresponding key, LED is lit.
Steaming, Combi-Steaming, Convection, Multifunction key
Set TIME
with corresponding rotary knob.
Set TEMPERATURE with corresponding rotary knob
Upon selection of cooking mode corresponding basic setting is displayed
Core temperature control
Core temperature control can be used with all cooking modes.
Temperature range 20° - 99°C / 70° - 210°F
Set desired core temperature with rotary knob.
The time display indicates *
- - -*.
Charge the oven
Stick core probe into the centre of the product
Function Clima-Aktiv® (Humidity Control)
Can be used with all cooking modes except "steaming"
Press mode key briefly, then key Clima-Aktiv ® , LED is lit.
Press Start/Stop
LED Start/Stop is flashing, LED of cooking mode starts flashing.
As occasion demands press touch key for manual humidification
Not with cooking mode steaming.
Program under process
Time runs down backwards, the colon in the time display is lit.
If available and in use (B-models) , core temperature display indicates the
DESIRED core temperature. Time display shows *---* continuous operation.
If the door is opened during program flow, fan motor and heating switch off, the
timer stops. Program continues if door is shut again.
Program flow may be stopped by pressing Start/Stop key. A broken off program
restarts with the originally set data.