Specifications

- 8 -
Display + Rotary knob TIMER (digital display, 3 characters)
Turn rotary knob to set the cooking time of the selected cooking mode
from 0:00 minutes to 24.0 hours. Turn left for * ---* continuous operation.
Display up to 10 hours in minutes 10.0), from 10.1 (10 hours 10 min.) in
10-minute intervals.
B models: When working with core temperature control, time is
automatically set to * - - - * Continuous operation.
Display + Rotary knob TEMPERATURE
Turn rotary knob to set cooking temperature of the selected cooking
mode from 30° to 300°C / 85° - 570°F
As long as the heating is on, a red dot down in the right hand corner of
the display is lit.
Once this knob is turned while a program is running down, the ACTUAL
temperature in the oven cavity is displayed for 3 seconds. Then the
display returns to the set DESIRED temperature.
Display + Rotary knob CORE TEMPERATURE
Core temperature control can be used with all cooking modes.
Temperature range 20° - 99°C / 70° - 210°F
Turn rotary knob to set desired core temperature.
Time display indicates automatically * - - - * Continuous operation.
Once this knob is turned while a program is running down, the ACTUAL
core temperature is displayed for 3 seconds. Then the display returns to
the set DESIRED temperature.
2.3 Selecting / changing the multifunction key assignment
Selection and changing the required assignment of the
key is
possible within the range for manual entry. Press the
and M keys
simultaneously to open the M memory – this is accompanied by an
audible signal.
Use the rotary knob time to select one of the following key assignments:
Regeneration: display rE
NT Cooking: display Lt,
Delta-T Cooking: display dt
Pressing the M key
saves the selected assignment, which is
confirmed by an audible signal.
An exit from the
memory is possible at any time by means of the
ON/OFF key.
dt
Lt
rE