Specifications

- 11 -
3.3 Core temperature control
Core temperature control can be used with all cooking modes. However, make sure to enter
always higher core temperatures in following steps, since the oven switches automatically off,
once the highest core temperature is reached.
3.4 Function: Delay start programming
This function allows to have an entered or stored program or a combination automatically
started within a period of up to 24 hours. Enter or call a program or Combitronic ® combination
and load the oven.
Program "delay start"
Keep START/STOP key pressed (about 3 seconds) until 0:00 in the time display
is flashing.
Use the rotary knob "time" to set the period of time after which this program is
supposed to start. Example: set to 5.00 = the oven will start the entered program
after 5 hours.
Press START/STOP. While the time is running down backwards, the LED in this
key is flashing.
The oven starts the entered program automatically once the time has run down.
Cancel "delay start"
Keep START/STOP key pressed (about 3 seconds) until the indication on the
display returns to normal program mode.
For hygienic reasons do not keep food too long at room temperature!