User Manual
Table Of Contents
- 1. Introduction
- 1.1 Product Compliance
- 1.2 Safety Informations
- 2. Product Overview
- 2.1 Package content
- 2.2 Proper thermostat location
- 2.3 Wall mounting
- 3. SR868 smart relay receiver
- 3.1 Smart relay LED indication
- 3.2 Connection description
- 4. Before you start (first power up)
- 4.1 LCD icon description
- 4.2 Button description
- 4.3 First power up sequence and configuration
- 5. User settings
- 5.1 Manual mode - changing temperature setpoint
- 5.2 Frost protection mode
- 5.3 Sleep mode
- 5.4 Heat/Cool mode *
- 6. Installer mode
- 6.1 DIP switches parameters
- 7. RT310TX thermostat pairing with the SR868 relay receiver
- 8. RT310TX thermostat pairing with few other receivers
- 9. Test the pairing process
- 10. Reset function
- 11. Cleaning and Maintenance
- 12. Technical Informations
- 13. Warranty
8
3. SR868 smart relay receiver
3.1 Smart relay LED indication
The SALUS SR868 relay gives you control of the electrical heating. SR868 must be used in conjunction with the wireless RT series thermostats. The
thermostat communicates wirelessly with the SR868 smart plug receiver. The receiver should be supplied with 230VAC, the maximum load of the receiver
is 16A. Avoid installing the device in places directly exposed to water, moisture and air condensation.
Smart relay receiver has designed LED diode in the left upper corner. Here is description what an every single colour and diode means:
LED State Description
Red
On The relay is o.
Flash The relay is in pairing mode.
Green
On The relay is on.
2 x Flash The relay is writing pairing code.
Red and Green
Flash alternately The relay is paired but lost link.
Flash in dierent sequence It indicates the software version after reboot.