User Manual
Table Of Contents
- 1. Introduction
- 1.1 Product Compliance
- 1.2 Safety Informations
- 2. Product Overview
- 2.1 Package content
- 2.2 Proper thermostat location
- 2.3 Wall mounting
- 3. SR868 smart relay receiver
- 3.1 Smart relay LED indication
- 3.2 Connection description
- 4. Before you start (first power up)
- 4.1 LCD icon description
- 4.2 Button description
- 4.3 First power up sequence and configuration
- 5. User settings
- 5.1 Manual mode - changing temperature setpoint
- 5.2 Frost protection mode
- 5.3 Sleep mode
- 5.4 Heat/Cool mode *
- 6. Installer mode
- 6.1 DIP switches parameters
- 7. RT310TX thermostat pairing with the SR868 relay receiver
- 8. RT310TX thermostat pairing with few other receivers
- 9. Test the pairing process
- 10. Reset function
- 11. Cleaning and Maintenance
- 12. Technical Informations
- 13. Warranty
6
2.1 Package content
1) RT310TX thermostat
2) SR868 smart relay receiver
2) 2x AA batteries
3) Short instruction
4) Mounting screws
2.2 Proper thermostat location
Please note:
The ideal position to thermostat mounting is about 1,5m under oor level far from heating or cooling sources. Thermostat can’t be
exposed to sunlight or any extreme conditions like for example draft.
Because of re and explosion risk there is not allowed to use thermostat in atmosphere of explosive gases and ammable liquids (eg coal dust). In case
if any of listed dangers occur you have to use additional protection measures – anti-dust and explosive gases (tight cover) or prevent their formation.
Furthermore, thermostat can’t be used in condensation of water vapor conditions and be exposed to water action.
1
4
2 3
5