User Manual

14
5.4 Heat/Cool mode *
User can set thermostat for heating or cooling. In HEAT mode thermostat is displaying ame icon all the time. When thermostat is in HEAT mode and
thermostat is CALLING for HEAT – the ame icon is ashing. In COOL mode thermostat is displaying snowake icon all the time. When thermostat is
switched to the COOLING mode and the thermostat is CALLING for COOL – then the snowake icon is ashing. Default mode is HEAT MODE.
NOTE: every time when thermostat need to start call for cooling then it can be delayed for about 3 minutes.
To set selected mode please follow steps below:
HOW TO SET COOLING MODE:
HOW TO SET HEATING MODE:
By default thermostat is in HEATING
mode (ame icon is displaying).
To change the thermostat into the
COOLING mode – press and hold the
SNOWFLAKE button for 5 seconds.
To change the thermostat into the
HEATING mode – press and hold the
SNOWFLAKE button for 5 seconds.
When thermostat is switched to the
COOLING mode – the snowake icon
is steady ON. If thermostat is CALLING
for COOL – then the snowake icon is
ashing.
When thermostat is switched to the
HEATING mode – the ame icon is
steady ON. If thermostat is CALLING
for HEAT – then the ame icon is
ashing.
5 sec
5 sec
1
1
2
2
* Function available only from rmware version 2.1