User Manual
Table Of Contents
- 1. Introduction
- 1.1 Product Compliance
- 1.2 Safety Informations
- 2. Product Overview
- 2.1 Package content
- 2.2 Proper thermostat location
- 2.3 Wall mounting
- 3. SR868 smart relay receiver
- 3.1 Smart relay LED indication
- 3.2 Connection description
- 4. Before you start (first power up)
- 4.1 LCD icon description
- 4.2 Button description
- 4.3 First power up sequence and configuration
- 5. User settings
- 5.1 Manual mode - changing temperature setpoint
- 5.2 Frost protection mode
- 5.3 Sleep mode
- 5.4 Heat/Cool mode *
- 6. Installer mode
- 6.1 DIP switches parameters
- 7. RT310TX thermostat pairing with the SR868 relay receiver
- 8. RT310TX thermostat pairing with few other receivers
- 9. Test the pairing process
- 10. Reset function
- 11. Cleaning and Maintenance
- 12. Technical Informations
- 13. Warranty
10
4. Before you start (rst power up)
4.2 Button description
4.1 LCD icon description
1. Heating Mode indication
2. Cooling Mode */Frost protection
mode indication
3. RF signal indicator (only in RT310RF)
4. Low battery status
5. Temperature unit
6. Room / setpoint temperature
PLEASE NOTE! The LCD screen can be activated by using any button.
1. Turn on the LCD backlight
2. HEAT/COOL * modes change
or Frost Protection mode
activation (only when HEAT
mode is enabled)
4. Increase button
5. Decrease button
1 5
6
3
2
4
1 3
2 4
* Function available only from rmware version 2.1