User Manual
Table Of Contents
- CONTENTS
- Chapter 1 Product Overview
- Chapter 2 Working Principle
- 2.1 Microwave/Millimeter-Wave Frequency Conversio
- 2.2 Frequency Synthesis Module
- 2.3 IF Signal Processing Module
- 2.4 Data Processing, Display and Control Module
- Chapter 3 Analysis on Common Faults
- 3.1 Lighting failure of power indicator lamp
- 3.2 No response of key
- 3.3 No zero frequency signal
- 3.4 Frequency accuracy out of standard
- 3.5 No signal detected when the pan smaller than
- 3.6 Large deviation between the signal amplitude
- condition
- 3.7 SWR deviation at input port
- 3.8 Phase noise deviation
- 3.9 Abnormal attenuation control
- 3.10 No display for battery under charging and cu
- Chapter 4 Repair of Parts
- 4.1 Removal Process
- Chapter 5 Calibration of the Main Unit
- 5.1 Temperature Compensation
- 5.2 Automatic Test of Indicators
Tel: 886.909 602 109 Email: sales@salukitec.com
www.salukitec.com
6
Chapter 1 Product Overview
The S3302 series spectrum analyzer embraces such advantages as wide working frequency band, high
performance indexes, high sweep speed, multiple test functions and easy operation. The integration of 8.4 inch
LCD and capacitive touch screen improves the display definition and operation convenience. The portable
structure with small volume, light weight, flexible power supply and convenient maneuverability makes it very
suitable for on-site use.
Key Features:
● Wide frequency range: 9 kHz - 67 GHz, with 9 models
● Extremely low displayed average noise level: Up to -163 dBm@1 Hz RBW (typical value)
● Excellent phase noise performance: -106 dBc/Hz@100 kHz frequency offset@1 GHz carrier
● High sweep speed: Min. sweep time at 1 GHz span <20 ms
● Resolution bandwidth: 1 Hz - 10 MHz
● Preamplifier in full frequency band: Standard configuration
● Multiple measurement function modes: Spectrum analysis, interference analysis (waterfall plot, RSSI),
simulation demodulation (AM/FM/PM), channel sweep, high-precision USB power measurement, etc.
● Multiple intelligent measurement functions: Field intensity measurement, channel power, occupied
bandwidth, adjacent channel power, audio demodulation, carrier-to-noise ratio, emission mask, etc.
● Multiple auxiliary test interfaces: 10 MHz reference input/output interface, GPS antenna interface, zero span
IF output interface, external trigger input interface, etc.
● Convenient and fast user operation experience: 8.4 inch large screen of high brightness LCD and large font
display, integrated with capacitive touch screen, allowing convenient operation and multiple display modes,
etc.
● Working temperature range: -10℃ - 50℃.
● Power supply: battery or adapter.
Typical Applications:
● On-site comprehensive performance evaluation of electronic weapon equipment
● On-site test and diagnosis of transmitter and receiver
● Broadband spectrum monitoring, interference identification