Tus neeg siv phau ntawv

Tel: [phone] Email: [e-mail]
www.salukitec.com
96
· [Emission Mask Off On]: Press [Measure]→ [Emission Mask]→
[Emission Mask Off On] to enable or disable the emission mask function.
·[Channel BW]: Press [Measure]→ [Emission Mask]→ [Channel BW] and
set the reference channel bandwidth with number keys.
· [Recall Limit]: Press [Measure]→ [Emission Mask]→ [Recall Limit], and
relevant soft menus will pop up, including [Head], [Tail], [Page Up],
[Page Down], [Done] and [Delete]. The user can select the limit file to
be recalled.
· [Reference power]: Press [Measure]→[Emission Mask]→[Ref Power]
to set the reference power setting mode. The peak power or channel
power may be used as the reference power.
· [Peak Markers Off
On]: Press [Measure]→ [Emission Mask]→ [Peak
Markers Off On] to enable or disable the peak marker.
· [Page Up]: Press [Measure]→ [Emission Mask]→ [Page Up] to view the
information on the previous page.
· [Page Down]: Press [Measure]→ [Emission Mask]→ [Page Down] to
view the information on the following page.
By using the IQ capture function, the original IQ data can be captured according to the capture time, sample rate
and capture mode set by the user, and data files can be saved for data analysis.