Tus neeg siv phau ntawv

Tel: [phone] Email: [e-mail]
www.salukitec.com
91
· [Tune Listen]: Press [Measure]→ [More 1/2]→ [Tune Listen] to enable
the tune listening function. Refer to [Tune Listen] menu description for
details.
·[IQ Capture]: Press [Measure]→ [More 1/2]→ [IQ Capture] to enable the
IQ capture function. Refer to [IQ Capture] menu description for details.
The spectrum analyzer has the function of field strength measurement, including soft menus such as [Field
Strength Off On], [Recall Antenna], [Edit Antenna] and [Save Antenna]. The field strength can be rapidly
tested with such menus and corresponding test antennas.
· [Field Strength Off On]: Press [Measure]→ [Field Strength]→ [Field
Strength Off On] to enable or disable the field strength measurement
function.
· [Recall Antenna]: Press [Measure]→ [Field Strength]→ [Recall
Antenna], and soft menus such as [Head], [Tail], [Page Up], [Page
Down], [Done] and [Delete] will pop up, you can select and recall the
saved antenna factor file in the spectrum analyzer.
·[Edit Antenna]: Press [Measure]→ [Field Strength]→ [Edit Antenna],
and soft menus such as [Add Point], [Delete Point], [Delete All],
[Done] and [Cancel] will pop up. You can edit the antenna factor.
·[Save Antenna]: Press [Measure]→ [Field Strength]→ [Save Antenna]
to save the antenna factor.
· [Back]: Press [Measure]→ [Field Strength]→ [Back] to exit the field
strength menu and go back to the “Measure” menu.