Tus neeg siv phau ntawv

Tel: [phone] Email: [e-mail]
www.salukitec.com
89
13 Limit menu
· [Limit Upper Lower]: Press [Limit]→[Limit Upper Lower] to set the
current limit as the upper or lower limit.
· [Limit Off
On]: Press [Limit]→ [Limit Off On] to enable or disable the
limit function.
· [Test Off
On]: Press [Limit]→ [Test Off On] to enable or disable the limit
test.
·[Edit Limit]: Press [Limit]→ [Edit Limit], including [Frequency],
[Amplitude], [Add Point], [Delete Point], [Left Point], [Right Point]
and [Default Limit], to view the frequency and amplitude of the limit point,
and add or delete the limit point.
· [Margin]: Press [Limit]→ [Margin] to set the offset allowance.
· [Alarm Off
On]: Press [Limit]→[Alarm Off On] to enable or disable the
audio alarm. The enabled audio alarm will be valid when the upper or
lower limit test is ON. The buzzer will utter a short sound if the value is
beyond the upper and lower limit during sweeping of the current screen.
· [Save Limit]: Press [Limit]→ [Save Limit] to save the limit.
· [Recall Limit]: Press [Limit]→ [Recall Limit], including [Head], [Tail],
[Page Up], [Page Down], [Done], [Delete] and [Cancel] to recall or
delete the saved limit.