Tus neeg siv phau ntawv

Tel: [phone] Email: [e-mail]
www.salukitec.com
26
 [Mode]: Set the measurement mode, including spectrum analysis, interference analysis, analog
demodulation, power measurement, channel scanning and field strength measurement.
Reset button
Press [Reset] to shut down the instrument and power up it again.
4 Reset button
Press [Preset] to shut down the instrument and power up it again.
5 Power switch
Start and shut down the spectrum analyzer. When the instrument powered up with the external power supply
through the adapter is in the “Standby” state, the yellow indicator near the power switch will be ON. If the power
switch is pressed for more than 3s, the indicator will turn green, indicating that this instrument is “operating”. When
the power switch is pressed for more than 3s in the operating state, the spectrum analyzer will be shut down.
Note: “Flicker” of the indicator indicates that the electricity quantity of the battery is not full at present and the battery
is being charged.