Tus neeg siv phau ntawv

Tel: [phone] Email: [e-mail]
www.salukitec.com
194
5 Demodulation menu
· [CW]: Press [Demod]→ [CW] to disable the demodulation mode.
· [FM]: Press [Demod]→ [FM] to enable the FM mode.
· [AM]: Press [Demod]→ [AM] to enable the AM mode.
· [USB]: Press [Demod]→ [USB] to enable the upper sideband mode.
· [LSB]: Press [Demod]→ [LSB] to enable the lower sideband mode.
· [Speaker Off
On]: Press [Demod]→[Speaker Off On] to enable or
disable the audio alarm function.
· [Special note]: If the audio alarm is enabled, the demodulation mode
such as [FM], [AM], [USB] and [LSB] will not be available.
· [Volume 95]: Press [Demod]→[Volume 95] to set the demodulation
volume. Set the required volume with the number keys or [↑] or [↓] key or
knob.
6 Measurement menu
· [Point Scan: Press [Measure]→[Point Scan] to select the point scan
mode of location analyzer.
· [Horizon Scan]: Press [Measure]→[Horizon Scan] to select the
horizontal scan mode of location analyzer.
· [Map Location]: Press [Measure]→[Map Location] to select the map
location mode of location analyzer.