Tus neeg siv phau ntawv

Tel: [phone] Email: [e-mail]
www.salukitec.com
191
Section 3 Description of Location Analyzer Menu
1 Frequency menu
·[Center Freq]: press [Freq]→[Center Freq], to select [GHz], [MHz], [kHz]
or [Hz] by number key on front panel or [↑] or [↓] key and spinning wheel in
frequency menu.
·[Special Notice]: in case of using [↑] or [↓] key and spinning wheel,
the frequency step is same with the set value of [Step Freq]. After
pressing [Step Freq Auto Man] to switch to [Step Freq Auto Man], it is
allowed to use the number key or [↑] or [↓] key and spinning wheel to
set the step frequency.
·[CF Step Auto
Man]: press [Freq]→[CF Step], by using number keyto
select [GHz], [MHz], [kHz] or [Hz] by number key on front panel or [↑] or [↓]
key and spinning wheel in frequency menu.
·[Positon 1 2 3]: Press [Freq]→[Position], by switching the menu
indication to achieve the data saving.
·[Position Save]: Press [Freq]→[Position Save], this menu enables data
saving of the current positioning information.
·[Position Edit]: Press [Freq]→[Position Edit], can open the positioning
data editing submenu, select [Del], [Load] and [Cancel].