Tus neeg siv phau ntawv

Tel: [phone] Email: [e-mail]
www.salukitec.com
187
Fig. 11-1 Schematic diagram of point scan
2 Horizon Scan
The horizon scan is to display the measured value information after one rotation of the current measuring point on a
horizontal disc. The main procedures of the horizon scan measurement are as follows:
1) Press [Measure]→[Horizon Scan], select horizol scan measurement mode.
2) Press [Freq]→[Pot Freq], set point frequency value.
3) Press [BW]→[BW], set bandwidth value, the bandwidth is set as s 150Hz, 300Hz, 600Hz, 1.5kHz, 2.4kHz, 6kHz,
9kHz, 15kHz, 30kHz, 50kHz, 120kHz or 150kHz.
4) Press [Swp/Ant]→ [Recall Antenna], select the antenna factor file.
5) Press [Demod], set the demodulation type and volume.