Tus neeg siv phau ntawv

Tel: [phone] Email: [e-mail]
www.salukitec.com
180
6 Peak menu
·[Peak Search]: press [Peak]
→
[Peak Search], to set the current marker at
the maximum peak point of measuring trace and indicate the frequency
and amplitude of the marker.
·[Next Peak]: press [Peak]→[Next Peak], to move the marker to next
peak point on trace which is linked with current marker.
·[Next Pk Left]: press [Peak]→[Next Pk Left], to search the next peak on
the left of current marker position.
·[Next Pk Right]: press [Peak]→[Next Pk Right], to search the next peak
on the right of current marker position.
·[Max Search]: this is used to place a marker at the highest point of trace
and display the frequency and amplitude of the marker in the top right
corner of screen. When this key is pressed, the activated function will not
change.
·[Min Search]: this is used to place a marker at the lowest point of trace
and display the frequency and amplitude of the marker in the top right
corner of screen. When this key is pressed, the activated function will not
change.
·[Marker
→
Center]: press [Peak]
→
[Marker
→
Center], to set the center
frequency as marker frequency. This function can quickly move the signal
to the center of screen.