Tus neeg siv phau ntawv

Tel: [phone] Email: [e-mail]
www.salukitec.com
165
4 Bandwidth menu
· [BW 30kHz]: Press [BW]→ [BW 30kHz] and set the bandwidth with the
number keys on the front panel. Select [GHz], [MHz], [kHz] or [Hz]
in the frequency unit menu, or set the reference value with the [↑] or [↓]
key or knob.
· [Special note]: The bandwidth must be set as 150Hz, 300Hz, 600Hz,
1.5kHz, 2.4kHz, 6kHz, 9kHz, 15kHz, 30kHz, 50kHz, 120kHz or 150kHz.
· [Detector]: Press [BW]→ [Detector] to enable the detector menu,
including: Peak, Average and Real Time.
5 Marker menu
· [Max Search]: Press [Marker]→[Max Search] to set the marker at the
maximum point.
· [Marker Off
On]: Press [Marker]→ [Marker Off On] to enable or disable
the marker display.
· [Special note]: The marker menu will be valid only in the FScan and
MScan mode.
6 Peak menu
· [Max Searche]: Press [Peak]→[Max Search] to set the marker at the
maximum point.
· [Marker Off
On]: Press [Peak]→[Marker Off On] to enable or disable the
marker display.
· [Special note]: The peak menu will be valid only in the FScan and
MScan mode.