Tus neeg siv phau ntawv

Tel: [phone] Email: [e-mail]
www.salukitec.com
163
2 Frequency menu ([FScan] mode)
· [Stt Freq 500MHz]: Press [Freq]→[Stt Freq 500MHz] and set the
starting frequency with the number keys on the front panel. Select [GHz],
[MHz], [kHz] or [Hz] in the frequency unit menu, or set the starting
frequency with the [↑] or [↓] key or knob.
· [Special note]: The setting range of the starting frequency is 1MHz
to 44.1GHz.
· [Step Freq 10MHz]: Press [Freq]→[Step Freq 10MHz], and set the
sweeping frequency step with the [↑] or [↓] key or knob.
· [Poins 58]: Press [Frequency]→[Point 58] and set the number of
frequency sweeping points between 2 and 58.